Description

Baffle low profile- Black ABS – Neodymium magnets for grille capture.
Grille low profile- 5mm trim ring- metal grille, powder coated
Woofer : dual 5.25″, PP cone with mica, rubber surround, 20 oz magnet, 1″ voice coil, shielded for video protection
Midrange: 3″ PP cone with mica, rubber surround, 3/4” voice coil
Tweeter : dual 1″ silk dome, swivel 30 degrees, ferro-fluid, cooled, neodymium magnet
X-over : FR4 PCB board, 18dB woofer section, 18dB tweeter
Polyimide switch-auto protect reset switch, over power protection
4ohm/8ohm switchable on PCB
Gold plated terminal posts will accept 14AWG wire
Punch out in baffle for infrared sensor control
Frequency response : 45Hz-22KHz
Sensitivity : 88dB at 1W/1M
Recommended amplifier power : 10-150 watts
Impedance : 4ohm/8ohm selectable on PCB
Cut out size : 13″ X 6.5″
Weight (single pack) : 8.8 lbs
Depth : 3.35″
Carton dimensions (single pack) : 8.3″(H) X 12″(W) X 16″(L)
Paint mask and cut out template included
Fits 16″ on center stud walls
cut out template included