Description

Woofer : 6.5″ PP cone with mica, rubber surround, 1″ voice coil, 22 oz magnet, vented pole piece
Tweeter : 1″ teterone dome, swivel 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersion
X-over : FR4 PCB board, 12dB woofer section, 12dB tweeter section
Polymide auto protective reset switch for tweeter
Gold plated terminal posts will accept 14AWG wire
4ohm/8ohm switchable on PCB
Punch out in baffle for infrared sensor control
Frequency response : 48Hz-22KHz
Sensitivity : 88dB
Recommended amplifier power : 10-125 watts
Impedance : 4ohm/8ohm selectable on PCB
Cut out size : 11″ X 7.55″
depth : 3.43″
Weight (pair pack) : 13.5 lbs
Carton dimensions (pair pack) : 12.4″(H) X 13.4″(W) X 14.5″(L)
Paint mask and cut out template included
-301 stainless steel mounting hardware
-Aluminum grille with white powdercoat