Description

Woofer : 5.25″ PP cone with mica, rubber surround, 1″ voice coil, 18 oz magnet, vented pole piece.
Tweeter : 19mm teterone dome, swivel 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersion
X-over : FR4 PCB board, 12dB woofer section, 12dB tweeter section
Polymide auto protective reset switch for tweeter
Gold plated terminal posts will accept 14AWG wire
4ohm/8ohm switchable on PCB
Punch out in baffle for infrared sensor control
Frequency response : 55Hz-22KHz
Sensitivity : 87dB
Recommended amplifier power : 10-100 watts
Impedance : 4ohm/8ohm selectable on PCB
Cut out size : 10.5″ X 7.25″
depth : 3.35″
Weight (pair pack) : 11 lbs
Carton dimensions (pair pack) : 10.6″(H) X 13″(W) X 14.3″(L)
Paint mask and cut out template included
-301 stainless steel mounting hardware
-Aluminum grille with white powdercoat