Description

Woofer : 8″ woven kevlar cone, 1.25″ voice coil, 25 oz magnet, bumped back plate, vented pole piece
Midrange : 3″ woven kevlar cone, rubber surround
Tweeter : 1″ titanium dome, ferro-fluid cooled, 30 degree swivel and pivot, neodymium magnet
X-over : FR4 board with 18dB per octave crossover for tweeter and woofer sections
+/- 3dB attenuation switches on woofer, tweeter, and midrange
4ohm/8ohm switchable on PCB
Polymide switch-auto protect reset switch, over power protection for tweeter and Midrange
16AWG wire connection to woofer section
Gold plated terminal posts will accept 14AWG wire
Punch out in baffle for infrared sensor control
Frequency response : 40Hz-22KHz
Sensitivity : 89dB 1W/1M
Recommended amplifier power : 10-150watts
Impedance : 4ohm/8ohm selectable on PCB
Cutout size : 13″ X 9″
Depth : 3.82″
Weight (pair pack) : 17 lbs
Carton dimensions (pair pack) : 13″(H) X 15″(W) X 16.4″(L)
Paint mask and cut out template included
-301 stainless steel mounting hardware
-Aluminum grille with white powdercoat