Description

Woofer : 5.25″, woven kevlar cone, 1″ voice coil, 18 oz magnet, bumped back plate, vented pole piece
Tweeter : 1″ titanium dome, ferro-fluid cooled 30 degree swivel and pivot, neodymium magnet
X-over : FR4 board with18dB per octave crossover for tweeter and woofer sections
+/- 3dB attenuation switches on woofer and tweeter
4ohm/8ohm switchable on PCB
Polyimide switch-auto protect reset switch, over power protection for tweeter
16AWG wire connection to woofer section
Gold plated terminal posts will accept 14AWG wire
Punch out in baffle for infrared sensor control
Frequency response : 50Hz-22KHz
Sensitivity : 87dB 1W/1M
Recommended amplifier power : 10-100 watts
Impedance : 4ohm/8ohm selectable on PCB
Cutout size : 10.5″ X 7.25″
Depth : 3.35″
Weight (pair pack) : 11 lbs
Carton dimensions (pair pack) : 10.6″(H) X 13″(W) X 14.3″(L)
Paint mask and cut out template included
-301 stainless steel mounting hardware
-Aluminum grille with white powdercoat