Description

Woofer : 8″ PP cone with mica, rubber surround, 1.25″ voice coil, 25 oz magnet, vented pole piece
Tweeter : 1″ teterone dome, swivel 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersion
X-over : FR4 PCB board, 12dB woofer section, 12dB tweeter section
Polymide auto protective reset switch for tweeter
16 AWG to woofer section
Gold plated terminal posts will accept 14AWG wire
4ohm/8ohm switchable on PCB
Punch out in baffle for infrared sensor control
Frequency response : 45Hz-22KHz
Sensitivity : 89dB
Recommended amplifier power : 10-150 watts
Impedance : 4ohm/8ohm selectable on PCB
Cut out size : 13″ X 9″
depth : 3.82″
Weight (pair pack) : 15.75 lbs
Carton dimensions (pair pack) : 13″(H) X 15″(W) X 16.4″(L)
Paint mask and cut out template included

-301 stainless steel mounting hardware
– Aluminum grille with white powdercoat